| Printing | Method | Thermal line dot printing |
|---|
| Number of dots/line | 384 | 576 |
|---|
| Resolution (dots/mm) | 8 |
|---|
| Paper width (mm) | 58 | 80 |
|---|
| Printing width (mm) | 48 | 72 |
|---|
| Speed (mm/sec) max | 100 | 80 |
|---|
| Paper path | Curved |
|---|
| Detection | Head temperature | By thermistor |
|---|
| Platen position | By mechanical switch |
|---|
| Out of paper | By photo interrupter |
|---|
| Cutter home position | By photo interrupter |
|---|
| Power supply (V) | Operation voltage (Vdd) | 2.7 to 3.6 / 4.75 to 5.25 |
|---|
| Operation voltage (Vp) | 4.75 to 9.5 | 6.5 to 9.5 |
|---|
| Peak current (A) | Head | 3.66 (9.5V / 64dots) / 5.49 (9.5V / 96dots) | 3.60 (9.5V / 64dots) / 5.40 (9.5V / 96dots) |
|---|
| Motor | 0.6 |
|---|
| Cutter | 0.7 |
|---|
| Auto cutter | Method | Slide type |
|---|
| Paper thickness (μm) | 54 to 80*1 |
|---|
| Cutting type | Full cut / Partial cut (Leave center point) |
|---|
| Operating time (sec/cycle) max | Approx. 1.0 |
|---|
| Cutting pitch (mm) min | 10 |
|---|
| Cut frequency (cut/min) max | 30 |
|---|
| Service Life | Pulse activation (pulse) | 100 million |
|---|
| Abrasion resistance (km) | 50*1 |
|---|
| Paper cutting (cut) | 500,000*1 |
|---|
| Operating temperature (˚C) | -10 to 50 |
|---|
| Dimensions (W×D×H mm) | 83.1 × 35.4 × 26.9*2 | 105.1 × 35.4 × 27.2*2 |
|---|
| Mass (g) | Approx. 125 | Approx. 148 |
|---|
.jpg "CAPD245/345")
