• CFast 3SE

Ürün Tanımı

Product Features
  • SATA III interface
  • Extremely low power consumption
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Hardware write protect
  • Enhanced power cycling management


Overview:

The Innodisk CFast 3SE operates at SATA III 6.0 Gb/s, which offers data transfer rate of read up to 470MB/sec. and of sequential write up to 250MB/s. Compliant with CFast 2.0 standard, it is designed with 7+17 pin connector and is SATA compatible. Due to the idle power saving, it reduces 30% power consumption. CFast 3SE is featured as small form factor, and suitable for most industrial application.

CFast 3SE can work under harsh environment, and complies with ATA protocol. Without additional drives, the disk can be configured as a boot device or data storage device. CFast 3SE support hardware write protect to prevent modification of valuable data on a device. Besides, through Innodisk's enhanced power cycling technology and more capacitors, CFast 3SE prevents data loss caused by sudden power failure. By using Innodsik's iSMART, users can not only monitor the operation status of SSD, but also visualize Wear-Leveling status with graphics.

Specifications:

Model NameCFast 3SE
InterfaceSATA III 6.0 Gb/s
Flash TypeSLC
TypeStandard
Capacity1GB~64GB
Max. Channels4
Sequential R/W (MB/sec, max.)470/250
Max. Power Consumption1W
Thermal SensorOptional
H/W Write ProtectY
S.M.A.R.T.Y
Dimension (WxLxH/mm)42.8 x 36.4 x 3.6
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Storage Temperature-55°C ~ +95°C
Operation TemperatureStandard Grade: 0°C ~ +70°C;
Industrial Grade: -40°C ~ +85°C

1GB2GB4GB8GB16GB32GB64GB


Ürün Detayları

  • Flash Type: SLC

Ürün Dosyaları

Kategori Dosyaları