• SATADOM-ML 3SE

Ürün Tanımı

Product Features
  • SATA 6Gb/s interface
  • iSMART disk health monitoring
  • Intelligent error recovery system
  • Excellent data transfer speed
  • Write protection security
  • Zero mechanical interference
  • Anti-vibration mechanical design



Overview:

Innodisk SATADOM-ML 3SE is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, Innodisk SATADOM-ML 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk SATADOM-ML 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Specifications:

Model NameSATADOM-ML 3SE
InterfaceSATA III 6.0 Gb/s
Flash TypeSLC
TypeVertical
Capacity8GB~64GB
Max. Channels4
Sequential R/W (MB/sec, max.)490/250
Max. Power Consumption2W (5V x 400mA )
Thermal SensorWide Temp. only
H/W Write ProtectY
Pin 7 PowerY
Pin 8 PowerN
ATA SecurityY
S.M.A.R.T.Y
Dimension (WxLxH/mm)35.5 x 30.0 x 9.5
Vibration20G@7~2000Hz
Shock1500G@0.5ms
MTBF>3 million hours
Storage Temperature-55°C ~ +95°C
Operation TemperatureStandard Grade: 0°C ~ +70°C;
Industrial Grade: -40°C ~ +85°C

8GB16GB32GB64GB


Ürün Detayları

  • Flash Type: SLC
  • Kapasite: 8GB, 16GB, 32GB, 64GB
  • Type: Vertical

Ürün Dosyaları

Kategori Dosyaları